Instructions For Re-Inking Your Stamp
Re-inking your stamp before it is completely dry will help prolong its life.
After thousands of impressions, you can easily re-ink your stamp with no mess.
PRE-INKED
Caution: Special Ultimark Re-Inking Fluid is required for pre-inked stamps. Using any other fluid could make your stamp unusable. You can Search for Ultimark Re-Inking Fluid in the search box to the left or by clicking here.
Step 1: Separate red top from gray base
Step 2: Squeeze 12 drops of re-inking fluid into each of the two rectangular-shaped ink chambers. (See Diagram)
Step 3: Fully replace red top on gray base.
Step 4: Let Stamp sit upright for 2-3 hours allowing ink to fully soak in before using.
SELF-INKED
Caution: Special Ideal Stamp Ink is required for self-inking stamps. Using any other fluid could make your stamp unusable. You can Search for Ideal Stamp Ink in the search box to the left or by clicking here.
Step 1: Press top down slightly and pull out stamp pad until the ink chambers are revealed. (See Diagram)
Step 2: Squeeze 10 Drops of re-inking fluid into each of the two ink chambers. (See Diagram)
Step 3: Wait 15 minutes, then add another 10 drops into each chamber.
Step 4: Press top down slightly and push stamp pad back into usable position.
Step 5: Let Stamp sit upright for 10 minutes before using.
